THE IGIBEE APPLICATION GUIDE

A little planning.
A whole new room.

How to apply IgiBee wall decals, one little piece at a time. Prepare your wall, plan your scene and bring their world to life.

Illustrative photo of applying a woodland wall decal

FROM SHEET TO LITTLE WORLD

Six simple steps to a lovely wall.

Keep your set’s size diagram nearby and take your time with each element. No extra glue is needed.

Illustrative image of wall decal sheets being laid flat

BEFORE YOU BEGIN

Prepare for their little world.

01

Let the decals settle

Unroll the sheets and lay them flat for about 12 hours at room temperature. Gently weight the corners of the backing sheet to help them flatten.

Before you begin · Allow about 12 hours
02

Prepare your wall

Remove dust and grease with a soft cloth and mild soapy water. Let the surface dry fully, then allow another 24 hours for remaining moisture to evaporate.

Clean · Dry · Sound paint
Illustrative close-up of peeling a wall decal from its backing

PLAN YOUR COMPOSITION

Make the scene your own.

03

Plan your little world

Check the size diagram and decide where each element will go. Each piece is separate, so you can arrange the scene around furniture and favourite corners.

Measure first · Arrange your way
04

Separate the elements

If it helps, cut the backing sheet into smaller sections around each element. Leave a clear margin and keep the scissors away from the printed design.

Cut the backing · Protect the design
Illustrative close-up of smoothing a wall decal onto a wall

BRING IT TO LIFE

Peel, smooth, enjoy.

05

Peel slowly, place gently

Carefully peel one element from its backing without stretching it. Position it gently on the wall. Ask a second person to help with large pieces.

Take your time · Work in pairs for large pieces
06

Smooth and enjoy

Smooth gently from the centre towards the edges with a soft cloth or a felt-edged squeegee. Check the edges and press them down carefully.

Centre to edges · Finish with the edges

Illustrative images. Follow the instructions supplied with your set.

A good result starts with the surface.

Our wall decals can be applied to smooth and textured walls, including strongly textured surfaces. The wall must be clean, dry and sound. Paint type and surface condition affect adhesion. For freshly painted walls, follow the paint manufacturer’s full curing time. If you are unsure, send us a photo of your wall before applying.

SEE IT IN ACTION

A little help,
before you peel.

Watch our application video, then keep the step-by-step guide open while you work.

Open the video on YouTube ↗

A LITTLE HELP BEFORE YOU BEGIN

Good to know.

Do I need extra glue?

No. IgiBee wall decals are self-adhesive. Peel each element from its backing and apply it to the prepared wall.

Can I choose my own arrangement?

Yes. Each element is separate. Use the dimensions shown in your product gallery to plan a composition that suits your room.

What if my wall is textured?

Our wall decals are suitable for smooth and textured walls, including strongly textured surfaces. Cleanliness, paint and surface condition still matter. Send us a photo if you would like help checking your wall.

Can I move or reuse a decal?

You can adjust the position carefully during installation. Once removed after application, the decals are not intended to be reused. Avoid repeatedly peeling and replacing an element.

Is this also a wallpaper installation guide?

This guide is for wall decals. Classic wallpapers need paste, while Peel & Stick wallpaper is self-adhesive. See our wallpaper material and preparation guide for the correct method.

WE ARE HERE TO HELP

Not sure about your wall?

Send us a photo of the surface and tell us which design you chose. We will help you prepare for your room’s little transformation.

Ask IgiBee →